WAGO DeviceNet 750-306, Manual

Page: 112 / 164

112 Fieldbus Communication WAGO-I/O-SYSTEM 750
750-306 DeviceNet
TM
Fieldbus Coupler
Manual
Version 2.0.0
Table 82: Instance 1
Attributes
ID Utilization
in Device Access
Rights Name Data Type Description
25 specific get/set BK_DO_FAU
LT_REACTIO
N_ON_RELE
ASE_COS USINT Defines the behavior after
allocation of the change of state
and cyclic
I/O connection
0: No activity (default)
1: Error behavior processing for
fieldbus coupler/controller
26 specific get/set BK_DO_FAU
LT_REACTIO
N_ON_RELE
ASE_ST USINT Defines the behavior after
allocation of the strobed
connection
0: No activity (default)
1: Error behavior processing for
fieldbus coupler/controller
40 specific get/set BK_static_anal
og_digital_inp
ut_mapping UINT Defines how the values for the
analog and digital input bits are
determined.
0000: All bits are digital.
0016: One word is analog, the
remaining bits are digital.
0032: Two words are analog, the
remaining bits are digital.
...
0xFFFF: All bits are handled as
“Module Type” (default).
41 specific get/set BK_static_anal
og_digital_inp
ut_mapping UINT Defines how the values for the
analog and digital outputs bits
are
determined.
0000: All bits are digital.
0016: One word is analog, the
remaining bits are digital.
0032: Two words are analog, the
remaining bits are digital.
...
0xFFFF: All bits are handled as
“Module Type” (default).
(If the number of analog bits
exceeds the size of the process
image, all bits are mapped to
analog bits.)
42 specific get/set BK_specific_c
oupler_
behavior UINT Defines the fieldbus
coupler/controller functionality.
0xFFFF: All possible functions
are enabled. (Resetting a bit to 0
disables the related function.)
It is only possible to reduce the
functionality. Resetting to “1” is
ignored.