Configuration in the WBM 57
852-1322/852-1328 Industrial Managed Switch
Manual
1.0.01
Table 26: WBM “Diagnostics” Page – “SNMP” Tab, SNMP V1/V2c Community Setting
Parameters
Factory Default Description
Trap Mode
Trap
Choose between Trap mode or Inform mode.
Trap server IP Null
Enter the IP address of your Trap Server.
Port
162
Enter the Trap server’s service port.
Community
String
Null
Enter the community string for authentication. The maximum
length of the string is 15 characters.
7.5.1.4 SNMP V3 Auth.
As mentioned earlier, SNMP V3 is a more secure SNMP protocol. In this part, the
user will be able to set a password and an encryption key to enhance the data
security. When SNMP V3 is chosen, the users can configure SNMP V3’s
authentication and encryption parameters. MD5 (Message-Digest algorithm 5) is
used for authentication password and DES (Data Encryption Standard) is used
for data encryption algorithm. Figure “WBM “Diagnostics” Page – “SNMP Tab”,
SNMP V3 Auth.” shows the SNMP V3 Authentication (Auth.) Setting options.
Figure 34: WBM “Diagnostics” Page – “SNMP Tab”, SNMP V3 Auth.
