14
Important Notes
WAGO-SPEEDWAY 767
767-5801/000-800 8DIO 24V DC 0.5A IF (8xM8)
Manual
Version 1.1.0
taken for the device, such as installation of an enclosure that is resistant to
the above-mentioned substance properties.
•
Electronic components fulfilling the ESD requirements according to the IEC
61000-6-2 are integrated in the 767 device. As higher voltages may occur,
under unfavorable circumstances, due to electrical charge in the field,
discharge must be ensured before performing work on the 767 system.
•
Ensure that the potential equalization is correctly laid out.
Pos: 16.20 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/I/O-Modul /Sicher hei tshi nweise 767- xxxx_3 @ 7\mod_1267624103126_21.docx @ 51676 @ @ 1
•
Keep all cables a sufficient distance away from electromagnetic sources of
interference in order to maintain a high level of interference resistance of
the 767 system against electromagnetic emissions. Use only shielded cables
at the necessary locations, and always observe the appropriate standards for
EMC-suitable installations.
•
For the power supply and for the S-BUS, use only pre-assembled WAGO
system cables, so the specified characteristics of the technical data can be
achieved.
Pos: 16.21 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/I/O-Modul /Sicher hei tshi nweise 767- xxxx_4 @ 7\mod_1267623157545_21.docx @ 51662 @ @ 1
•
Replace defective or damaged modules (e.g., deformed connections), else
function disruptions can occur in the respective fieldbus stations or nodes.
•
When laying any cables, make sure that you do not lay them within the
shear range of movable machine parts.
•
For each activity, observe the corresponding personnel qualification in the
corresponding section.
•
Observe the marking on the front and rear side of the module.
Pos: 16.22 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/I/O-Modul /Sicher hei tsei nrichtungen 767- xxxx @ 7\mod_1268142379773_21.docx @ 52055 @ 2 @ 1
2.3
Safety Equipment
All 767 Series products are designed to meet the requirements of IP67. This
includes complete protection against accidental contact with electrical voltage and
currents – even when wet.
Pos: 16.23 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
