Description 11
WAGO-SPEEDWAY 767
Fieldbus Coupler for CANopen
2 Description
This quick-start guide describes the process of starting up the 767-1501 Fieldbus
Coupler on a 758-870/000-012 Industrial PC.
I/O modules are connected to the fieldbus coupler via the S-BUS (system bus).
Start-up is completed in two steps. In the first step, the network is configured
using the PLC configuration inside CoDeSys 2.3. In the second step, a minimal
PLC program is created with CoDeSys 2.3 that outputs the status of the first
digital input on 767-1501 to the first digital output on 767-4801.
2.1 Accessories
This manual was created using the following software and hardware:
Name
Description
Item no./Version
WAGOframe
CD-ROM Ver. 3.0.0
FDT/DTM frame application
759-370
Ver. 1.0.8
WAGO USB driver
USB driver for 767 Series
759-922
Ver. 1.3.2
WAGO service interface
DTM
DTM for communication
759-371
Ver. 2.1.0
WAGO DTM for
fieldbus coupler and I/O
modules
Device DTM for 767 series
(programmable) fieldbus coupler and
I/O modules
759-361
Ver. 2.1.0
System update DTM
DTM for firmware update
759-362
Ver. 1.0.0
USB communication
cable
(WAGOframe)
M8 plug, straight
756-4101/0042-0030
