10
•
Modbus/TCP OPC Server
Installation
WAGO-I/O-SYSTEM 759
Modbus/TCP OPC server
2.3.1.2 Windows Socket 2.0
Step 1:
·
Ensure that Windows Sockets 1.x is installed.
·
Ensure that you use the TCP/IP protocol.
·
Start the program "redist\WinSock2\W95ws2setup.exe".
·
Follow the instructions of the installation program.
·
Restart your computer, if requested.
Step 2:
·
Start the program "redist\WinSock2\y2kvdhcp.exe".
·
Follow the instructions of the installation program.
·
Restart your computer, if requested.
The necessary installation programs are on the CD ROM in the directory
"[LW]:\Redist". (replace [LW] by the identifier of your CD ROM drive.)
2.3.2 Windows 98
The support for Distributed COM (DCOM98) is component of Windows 98.
Microsoft Corporation provides an update to the version 1.3 in the internet.
The distribution of this update is not permitted in accordance with the license
conditions (EULA) of Microsoft Corporation. You will find the current
DCOM98 version on the Microsoft homepage at:
http://www.microsoft.com/com/resources/downloads.asp
It is recommended to install this update in order to improve the stability of the
OPC server!
2.3.3 Windows ME
The support for Distributed COM (DCOM) is component of Windows ME.
Please install following program to configure DCOM:
"DCOMCNFG for Windows 95 and Windows 98"
·
Start the program "redist\dcom\dcm95cfg.exe".
·
Follow the instructions of the installation program.
·
Restart your computer, if requested.
Заказ на сайте
www.wgspb.ru
