WAGO 750-652/040-000 Manual Download Page 17

Page: 17 / 90

WAGO-I/O-SYSTEM 750 XTR

Device Description 17

750-652/040-000 Serial Interface RS-232/RS-485 XTR

Manual

Version 1.3.0

Mixed operation

Mixed operation (standard/XTR modules) within a node is possible when groups

of modules are electrically isolated on the field side (i.e., electrically isolated

power supply).

Increased interference!

For standard-compliant application in substation instrumentation and control,

telecontrol systems, railway technology or shipbuilding certified operation,

field-side power supply filter 750-624/040-001 or power supply filter

750-626/040-000 are generally to be used for XTR module groups.

The I/O module can be operated with all fieldbus couplers/controllers of the

WAGO-I/O-SYSTEM 750 XTR.

Observe the instructions for mixed operation when used in mixed operation behind

standard fieldbus couplers/controllers.

Summary of Contents for 750-652/040-000



























































































Search results

Summary of Contents for 750-652/040-000

Reviews:

Related manuals for 750-652/040-000

Brands by name

Popular brands

WAGO 750-652/040-000, Manual

Search results

Summary of Contents for 750-652/040-000

Reviews:

Related manuals for 750-652/040-000

Brands by name

Popular brands