32 Mounting
WAGO I/O System 750 XTR
750-600/040-001 End Module with Potential Group XTR
Manual
Version 1.0.1
Once the end module has snapped into place, the electrical connection for the
data contacts to the preceding I/O module is established The end module
completes the internal data bus, while providing correct data transmission.
4.2.2
Removing the End Module
1.
Remove the end module from the assembly by pulling the release tab.
Figure 6: Removing the End Module
The electrical connections for the data contacts are disconnected when removing
the end module. Correct data transmission via the internal data bus is no longer
provided.
