background image

WAGO I/O System 750 XTR 

Notes about this Documentation 

750-600/040-001 End Module with Potential Group XTR 

 

 

 

Manual 

 

Version 1.0.1  

 

Notes about this Documentation 

 

 

 

 

Always retain this documentation! 

This documentation is part of the product. Therefore, retain the documentation 

during the entire service life of the product. Pass on the documentation to any 

subsequent user. In addition, ensure that any supplement to this documentation 

is included, if necessary. 

 

 

1.1 

Validity of this Documentation 

 

This documentation is only applicable to the I/O module 750-600/040-001 

(End Module with Potential Group XTR). 

 

The I/O module 750-600/040-001 shall only be installed and operated according 

to the instructions in this manual, in the system description for the WAGO I/O 

System 750 XTR and in the manual for the used fieldbus coupler/controller. 

 

 

 

Consider power layout of the WAGO I/O System 750 XTR! 

In addition to these operating instructions, you will also need the system 

description “Design Notes XTR – Guidelines and Recommendations for 

Increasing Operational Safety” and the manual for the used fieldbus 

coupler/controller, which can be downloaded at 

www.wago.com

. There, you can 

obtain important information including information on electrical isolation, system 

power and supply specifications. 

 

 

1.2 

Copyright 

 

This Manual, including all figures and illustrations, is copyright-protected. Any 

further use of this Manual by third parties that violate pertinent copyright 

provisions is prohibited. Reproduction, translation, electronic and phototechnical 

filing/archiving (e.g., photocopying) as well as any amendments require the 

written consent of WAGO GmbH & Co. KG, Minden, Germany. Non-observance 

will involve the right to assert damage claims. 

 

 

 

Summary of Contents for 750-600/040-001

















































Reviews: