WAGO 750-496 Page 44 Manual Download

Page: 44 / 92

44 Commissioning

WAGO-I/O-SYSTEM 750

750-496 8AI 0/4-20mA S.E.

Manual

Version

1.2.2

Commissioning

7.1

Parameterization with WAGO-I/O-

CHECK

</dg_

The WAGO-I/O-

CHECK

software from WAGO Kontakttechnik GmbH & Co. KG

can be used to conveniently and completely configure and parameterize the I/O

module. You have the following options.

•

Graphical display of bus nodes

•

Display of the measured values

•

Settings for the application

•

Configuration of the I/O module operating modes

•

Parameterization of module, channel and scaling settings

•

Calibration of channels and adjustment of analog inputs

•

Monitoring

WAGO-I/O-

CHECK

You can obtain the WAGO-I/O-

CHECK

software on a CD under Item No. 759-

302. This CD contains all the application program files and an explanation. You

can find a description at the internet page at

http://www.wago.com

Save all your settings before you begin parameterization!

To be on the safe side you should always save all of your current settings in a

parameter file before you begin parameterization. This enables you to always

use the original values, should any parameters you are defining not be correct.

Summary of Contents for 750-496





























































































Search results

Summary of Contents for 750-496

Reviews:

Related manuals for 750-496

Brands by name

Popular brands

WAGO 750-496, Manual

Search results

Summary of Contents for 750-496

Reviews:

Related manuals for 750-496

Brands by name

Popular brands