manualshive.com logo in svg

WAGO 750-494 Series, Manual

The WAGO 750-494 Series offers a comprehensive range of versatile programmable fieldbus couplers. Experience seamless integration with your automation systems by downloading the free user manual from our website. Explore the extensive features and specifications of this product to optimize your industrial processes. (Please download the manual for free from manualshive.com.)

Share
Download
background image

6 

Notes about this Documentation 

WAGO-I/O-SYSTEM 750 

 

 

750-494 3-Phase Power Measurement Module 

 

Manual 

 

Version 1.2.0  

Pos: 7 /Alle Serien (Allgemeine M odul e)/Überschriften/Ebene 1/Hinweise zu dieser D okumentati on -  Überschrift 1 @ 4\mod_1237987661750_21.docx @ 29029 @ 1 @ 1 

 

1 

Notes about this Documentation 

Pos: 8 /Alle Serien (Allgemeine M odul e)/Sicher heits- und sonstige Hinweise/Hinweis/Hi nweis: D okumentation aufbewahr en @ 4\mod_1237987339812_21.docx @ 29026  @   @  1 

 

 

 

 

Always retain this documentation! 

This documentation is part of the product. Therefore, retain the documentation 

during the entire service life of the product. Pass on the documentation to any 

subsequent user. In addition, ensure that any supplement to this documentation is 

included, if necessary. 

 

Pos: 9 /Alle Serien (Allgemeine M odul e)/Überschriften/Ebene 2/Gültig kei tsbereich -  Überschrift 2 @ 12\mod_1338912448776_21.docx @  96469 @ 2 @  1 

 

1.1 

Validity of this Documentation 

Pos: 10 /Serie 750 ( WAGO-I/O-SYST EM)/Hi nweise zur D okumentati on/Gültigkeitsbereich/Gültig keitsber eich Dokumentation Buskl emme 750- xxxx, Standar dversi on und aufgelistete Varianten @ 14\mod_1358944038682_21.docx @ 109354 @  @ 1 

 

This documentation is only applicable to the I/O module 750-494 (3-Phase Power 

Measurement Module) and the variants listed in the table below. 

Pos: 11 /Serie 750 ( WAGO-I/O-SYST EM)/Hi nweise zur D okumentati on/Gültigkeitsbereich/Variantenlisten/Variantenliste - 750- 494 - Standardversionen 1A+5A  und  er w.T emp. /025- @ 15\mod_1366726767706_21.docx @ 117720 @  @ 1 

 

Table 1: Variants 

Item Number 

Description 

750-494 

3-Phase Power Measurement Module 1 A 

750-494/000-001 

3-Phase Power Measurement Module 5 A 

750-494/025-000 

3-Phase Power Measurement Module 1 A, 

Operating temperature -20 °C … +60 °C 

750-494/025-001 

3-Phase Power Measurement Module 5A, 

Operating temperature -20 °C … +60 °C 

 

Pos: 12 /All e Seri en (Allgemei ne Module)/Sicher heits-  und sonstige Hi nweise/Hi nweis/Hinweis: Gültig keit der Angaben für aufg elistete Varianten @ 9\mod_1281520778141_21.docx @  63085 @  @ 1 

 

 

 

 

Documentation Validity for Variants 

Unless otherwise indicated, the information given in this documentation applies to 

listed variants. 

 

Pos: 13 /Serie 750 ( WAGO-I/O-SYST EM)/Hi nweise zur D okumentati on/Hi nweise/Achtung: Hinweis zur D okumentati on Buskl emmen 750- xxxx @ 4\mod_1237986979656_21.docx @  29023 @  @ 1 

 

The I/O module 750-494 shall only be installed and operated according to the 

instructions in this manual and in the manual for the used fieldbus 

coupler/controller. 

 

 

 

Consider power layout of the WAGO-I/O-SYSTEM 750! 

In addition to these operating instructions, you will also need the manual for the 

used fieldbus coupler/controller, which can be downloaded at 

www.wago.com

. 

There, you can obtain important information including information on electrical 

isolation, system power and supply specifications. 

 

Pos: 14 /D okumentation allgemei n/Glieder ungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810  @   @  1 

 

 

 

Summary of Contents for 750-494 Series







































































































































Reviews:

No comments

Related manuals for 750-494 Series

ABB FPBA-01 PROFIBUS DP Quick Installation And Start-Up Manual preview
FPBA-01 PROFIBUS DP
Brand: ABB Pages: 2
ABB ControlMaster CM15 Instructions preview
ControlMaster CM15
Brand: ABB Pages: 4
GE NetworX NX-6V2 Installation Instructions Manual preview
NetworX NX-6V2
Brand: GE Pages: 8
Yardney Synergy Quick Start Manual preview
Synergy
Brand: Yardney Pages: 8
Walimex Pro Excellence Instruction Manual preview
Excellence
Brand: Walimex Pro Pages: 68
IDK SWC-2000 User Manual preview
SWC-2000
Brand: IDK Pages: 96
ICM Controls ICM325HN Installation, Operation & Application Manual preview
ICM325HN
Brand: ICM Controls Pages: 2
National Instruments NI 9514 User Manual preview
NI 9514
Brand: National Instruments Pages: 72
National Instruments NI 9514 Operating Instructions And Specifications preview
NI 9514
Brand: National Instruments Pages: 41
NAPCO MAGNUM ALERT 3000 FIRE ALARM Basic Operating Instructions preview
MAGNUM ALERT 3000 FIRE ALARM
Brand: NAPCO Pages: 2
Sunnen HTA-2000 (2M) Manual preview
HTA-2000 (2M)
Brand: Sunnen Pages: 24
RKC INSTRUMENT X-TIO-R Instruction Manual preview
X-TIO-R
Brand: RKC INSTRUMENT Pages: 10
Bardiani Valvole BBWMF1 Instruction, Use And Maintenance Manual preview
BBWMF1
Brand: Bardiani Valvole Pages: 118
Zero 88 Chilli Master Operating Manual preview
Chilli Master
Brand: Zero 88 Pages: 34
WAGO 750-429/040-001 Manual preview
750-429/040-001
Brand: WAGO Pages: 52
FAAC B614 Translation Of The Original Instructions preview
B614
Brand: FAAC Pages: 63
Hakko Electronics 999-252 Instruction Manual preview
999-252
Brand: Hakko Electronics Pages: 2
Evco EVCLC229N9E Manual preview
EVCLC229N9E
Brand: Evco Pages: 78

Brands by name

Popular brands

Load more brands