WAGO-I/O-SYSTEM 750
Operating Modes
53
750-484 2 AI 4-20 mA HART Ex i
Manual
V 1.2.0 HW-Version 04, SW-Version 03
9.1.2
Setting Up via GSD
When connecting to a PROFIBUS DP/V1 Fieldbus Coupler 750-333 or Controller
750-833, assuming that the HART I/O module is supplied in the default operating
mode, the mode must be changed over accordingly. The parameters for the
required operating mode can be set using the GSD files.
Additional Information for Download the GSD Files
The GSD files can be downloaded free of charge from the WAGO website at:
www.wago.com
→ Support → Ad
ditional documentation and information on
auto
mation products → WAGO Software
→ WAGO
-I/O-PRO / CODESYS.
You can find the link to “Libraries” in the column “Additional Information” on
the right side.
Before setting the parameters however, the components of the PROFIBUS
system, which define the structure of the input and output process image, must
first be configured.
The GSD files for PROFIBUS are read in or installed by the configuration
software used. These provide the characteristic device data necessary for
configuration, particulars of their communications capability and other
information. The size of the process images is then determined by the compiled
configuration data.
Additional Information on Installing the GSD Files
Please refer to the documentation for the configuration software which you are
using for information on installing the GSD files.
The required operating mode for the HART I/O module can be selected and
specified right at the configuration stage.
Further data for the HART I/O module can then be specified in a parameterization
dialog box corresponding to the selected module.
