WAGO-I/O-SYSTEM 750
Device Description
19
750-459 4AI 10V DC S.E.
Manual
Version 1.1.0
Pos: 18.14 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Anschlüsse/CAGE CLAMP-Anschlüsse - Überschrift 3 @ 6\mod_1256296337770_21.docx @ 43674 @ 3 @ 1
3.2.3
CAGE CLAMP
®
Connectors
Pos: 18.15 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Anschlüsse/Analogeingangsklemmen/Anschlüsse 750-0453, -0455, -0457 und -0459 @ 15\mod_1370335893038_21.docx @ 121647 @ @ 1
Figure 4: CAGE CLAMP
®
Connectors
Table 5: Legend for Figure “CAGE CLAMP
®
Connectors”
Channel Designation Connector Function
1
AI 1
1
Analog input1: Signal
Common
(ground)
2
Analog input: Common (ground)
2
AI 2
5
Analog input 2: Signal
Common
(ground)
6
Analog input: Common (ground)
3
AI 3
3
Analog input 3: Signal
Common
(ground)
4
Analog input: Common (ground)
4
AI 4
7
Analog input 4: Signal
Common
(ground)
8
Analog input: Common (ground)
Pos: 18.16 /Serie 750 (WAGO-I/O-SYSTEM)/Wichtige Erläuterungen/Sicherheits- und sonstige Hinweise/Hinweis/Hinweis: Geschirmte Signalleitungen verwenden! @ 7\mod_1265723251019_21.docx @ 50140 @ @ 1
Use shielded signal lines!
Only use shielded signal lines for analog signals and I/O modules which are
equipped with shield clamps. Only then can you ensure that the accuracy and
interference immunity specified for the respective I/O module can be achieved
even in the presence of interference acting on the signal cable.
Pos: 18.17 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
