2787-2144
Configuration
Product manual | Version: 1.0.0
51
Power Supply Pro 2
9.3.3.2 Display Section: Measurement Recording
Figure 32: Display Section: “Measurement Recording”
This display section can represent the time series of up to three different measured val-
ues (measurement recordings).
You can make the following settings for each time series:
Table 57: Display Section: “Measurement Recording”
Pos.
Setting
Description
1
Chart/Clock
Here you can specify whether a specific number of val-
ues (
chart
) or measured values over a specific time
period (
clock
) should be recorded. The corresponding
input form changes accordingly:
•
Pos. 3 = input form for
chart
•
Pos. 4 = input form for
clock
2
Measured Value Selection
Here you can select the measured value to record.
3
Number of samples
Here you can enter the number of measured values to
record (setting at pos. 1 =
chart
).
Sample rate
Here you can enter the recording cycle for the mea-
sured values (unit: ms)
With export
•
Box checked: The recording is exported as a CSV
file.
•
Box unchecked: The data is recorded only for on-
line display and not saved.
[Start]
Starts the recording (setting at pos. 1 =
chart
).
[Stop]
Stops the recording before the specified number is
reached (setting at pos. 1 =
chart
).
