WAGO 2787-2144, Product Manual

Page: 12 / 68

2787-2144 Properties
12 Product manual | Version: 1.0.0
Power Supply Pro 2
3 Properties
3.1 Introduction
The 2787 Series WAGO Power Supplies Pro 2 are compact switched-mode Power sup-
plies with a wide range of uses. The Power supplies can be fitted on a DIN-rail.
The Power supplies can be configured directly via buttons on the product or via the inte-
grated communication interface. For this purpose, the connection is established either via
the WAGO USB configuration cable or via an attached communication module. It is also
possible to record and evaluate various output parameters via the WAGO Interface Con-
figuration software, which is available separately.
The pluggable connection technology uses WAGO pluggable connectors. These allow
pre-wiring for quicker installation, as well as quicker and easier product replacement.
LEDs indicate various diagnostic messages (see section
8
Indicators [
}
16] ).
3.2 View
b
a
e
f
d
c
g
h
j
a
k
Figure 1: View
Table 2: Legend for “View” Figure
Position Comment For Details, See Section
a Ventilation openings –
b Signal (X3)
8
Signal [
}
16]