GB
7
Wall Extra I-Spray 1300
Before using the attachment, read these operating instructions and familiarise
yourself with the operating instructions for the basic unit. The safety instructions
for the basic unit apply to this Wall Extra I-Spray spray attachment.
The
Wall Extra I-Spray spray attachment
has been especially developed for the
application of interior wall paints. A high feed rate and working speed are the main
features of this spray attachment.
CAUTION!
•
The units may only be used with a functional valve.
If paints rises in the
ventilating hose (Fig. 1 A, item 13) do not operate the unit further!
Dismantle and clean the ventilating hose, valve and diaphragm and replace
the diaphragm if necessary.
•
Do not place the spray gun on the side.
•
Do not combine components from different spray attachments.
The parts could be damaged.
Description (Fig. 1 / 1A)
1) Air cap (to set the working direction)
2) Nozzle
3) Union nut
4) Needle
5) Spray jet width adjustment
6) Material quantity regulation
7) O-ring
8) Trigger
9) Suction tube
10) Container seal
11) Container
12) Feed hopper
13) Ventilating hose
14) Valve cover
15) Diaphragm
Preparation of the workplace
Sockets and plugs must be masked. Risk of an electric shock as a
consequence of sprayed material entering the socket!
Mask all the areas and objects that are not to be spray painted, or
remove them from the work area. No liability is assumed for damage
due to overspray.
Silicate paint corrodes glass and ceramic surfaces upon contact! All
such surfaces must therefore be completely covered.
Preparation of the Coating Material
i
Spray material that is at least at room temperature (e.g. diluted with warm
water) provides a better spray result.
Attention! Do not heat spray material above 40°C.
Interior wall paints can be sprayed undiluted or slightly diluted with the spray attachment
provided. Detailed information is available in the technical data sheet of the manufacturer
(
Æ
Internet download).
1. Stir the material thoroughly and dilute it in the container as per the recommended
dilution
(an agitator is recommended for stirring).
Summary of Contents for WALL EXTRA I-SPRAY 1300
Page 2: ...Wall Extra I Spray 1300 햲 20 30 cm 햳 햴 A B 햵 햶 11 9 4 8 C 10 7 3 1A 12 1 1 3 13 14 15 6 5 2 ...
Page 3: ...Wall Extra I Spray 1300 16 1 3 2 3 1 1 1 햷 햸 햹 햺 햻 ...
Page 4: ...Wall Extra I Spray 1300 D 1 6 7 12 13 18 19 24 GB NL F Fragen Questions Des questions Vragen ...
Page 29: ...25 Wall Extra I Spray 1300 Notizen Notes Remarques Opmerking ...