WAGNER W 640, Operating Instructions Manual

Page: 22 / 38

GB
8
W 640
Warning
If the supply cord of this appliance is damaged, it must only be
replaced by a repair shop appointed by the manufacturer, be-
cause special purpose tools are required.
Warning: Do not connect the blue or brown wire to the earth
terminal of the plug! The wires in this mains lead are coloured in
accordance with the following code:
blue = neutral brown = live
As the colours of the wires in the mains lead of this appliance
may not correspond with the coloured markings identifiying the
terminals in your plug, proceed as follows:
◆
Should the moulded plug have to be replaced, never re-use
the defective plug or attempt to plug it into a different 13 A
socket. This could result in an electric shock.
◆
Should it be necessary to exchange the fuse in the plug only
use fuses approved by ASTA in accordance with BS 1362. 5
Amp fuses may be used.
◆
To ensure that the fuse and fuse carrier are correctly mounted
please observe the provided markings or colour coding in the
plug.
◆
After changing the fuse, always make sure that the fuse car-
rier is correctly inserted. With out the fuse carrier, it is not per-
missible to use the plug.
◆
The correct fuses and fuse carriers are available from your
local electrical supplies stockist.
2 years guarantee
The guarantee runs for two years, counting from the date of sale (sales slip).
It covers and is restricted to free-of-charge rectification of faults which are demonstrably attributable to the
use of faulty materials in manufacture, or assembly errors; or free-of-charge replacement of the defective
parts. The guarantee does not cover incorrect use or commissioning or fitting or repair work which is not
stated in our operating instructions. Wearing parts are also excluded from the guarantee. The guarantee
excludes commercial use. We expressly reserve the right to fulfil the guarantee.
The guarantee expires if the tool is opened up by persons other than Wagner service personnel.
Transport damage, maintenance work and loss and damage due to faulty maintenance work are not
covered by the guarantee. Under any guarantee claim, there must be proof of purchase of the tool through
submission of the original receipt.
Wherever legally possible, we exclude all liability for injury, damage or consequential loss, especially if the
tool has been used for a purpose other than that stated in the operating instructions, commissioned or
repaired other than in accordance with our operating instructions or if repairs are performed by someone
who is unqualified.
We reserve the right to perform any repairs in excess of those stated in our operating instructions.
In case of guarantee or repair, please refer to your point of sale.