34
W 600 Flexio 18V
EN
14. Adjusting the Material Volume
(Standard spray attachment)
Set the material volume by turning the regulator on the trigger guard of the spray gun.
(Fig. 10)
lower material volume
turn anti-clockwise (-)
higher material volume
turn clockwise (+)
15. Setting the Amount of Air (Fig. 11)
i
Depending on the viscosity of the material to be sprayed and the finish of
the object to be coated, it may be advisable to vary the amount of air. Very
low viscosity materials, such as watery glazes do not have to be atomised
with the maximum amount of air. In this case it is advisable to reduce
the amount of air and thus minimize the spray vapour.
This also applies for the use of the Detail and Corner&Reach spray attachment
(accessory).
Increase the air volume by pressing the + button (Fig. 11, 1) and reduce it by pressing
Increase the air volume by pressing the + button (Fig. 11, 1) and reduce it by pressing
the - button (Fig. 11, 2).
the - button (Fig. 11, 2).
thin paint
thin paint
Level 1 to Level 3
Level 1 to Level 3
thick paint (e.g. interior wall paint)
thick paint (e.g. interior wall paint)
Level 3 to Level 5
Level 3 to Level 5
16. Spray Technique
i
The spray result depends heavily on the smoothness and cleanliness of the
surface to be sprayed. Therefore the surface should be carefully prepared and
kept free of dust.
•
Cover all surfaces not to be sprayed.
•
Cover screw threads or similar parts of the target object.
i
Important: Start at the edge of the area to be sprayed. Start the spray
movement first of all, and then press the trigger. Avoid interruptions
within the area to be sprayed.
•
The spray movement should come from the arm, not just from the wrist. This ensures that
a uniform distance is maintained between the spray gun and the spray surface during
the spray operation. Select a distance of 5 - 15 cm, depending on the desired spray jet
width. When you are using interior wall paint, the distance should be about 20-30 cm
(approx. one stirring rod in length).
Fig. 12 A/ 12 B:
CORRECT
Even distance to the object.
Fig. 12 C:
INCORRECT
An uneven distance will result in uneven paint
application.
Summary of Contents for W 600 FLEXIO 18V
