background image

22

 

Vector Pro

GB

AcceSSorieS

i

In order to use any accessories with an F-thread (11/16”) an adapter 

(P/N 0553300) is required.

imPortANt NoteS oN ProdUct liAbility

As a result of an EC regulation being effective as from January 1, 1990, the 

manufacturer shall only be liable for his product if all parts come from him or 

are released by him, and if the devices are properly mounted and operated.
If the user applies outside accessories and spare parts, the manufacturer´s 

liability can fully or partially be inapplicable; in extreme cases usage of the 

entire device can be prohibited by the competent authorities (employer´s 

liability insurance association and factory inspectorate division).
Only the usage of original WAGNER accessories and spare parts guarantees that 

all safety regulations are observed.

3+2 yeArS GUArANtee For ProFeSSioNAl FiNiShiNG 

Wagner professional guarantee 
(Status 01.02.2009)

1.  ScoPe oF GUArANtee 

All Wagner professional colour application devices (hereafter referred to as 

products) are carefully inspected, tested and are subject to strict checks under 

Wagner quality assurance. Wagner exclusively issues extended guarantees to 

commercial or professional users (hereafter referred to as “customer”) who 

have purchased the product in an authorised specialist shop, and which relate 

to the products listed for that customer on the Internet under www.wagner-

group.com/profi-guarantee. 
The buyer’s claim for liability for defects from the purchase agreement with the 

seller as well as statutory rights are not impaired by this guarantee. 
We provide a guarantee in that we decide whether to replace or repair the 

product or individual parts, or take the device back and reimburse the purchase 

price. The costs for materials and working hours are our responsibility. 

Replaced products or parts become our property. 

2. GUArANtee Period ANd reGiStrAtioN 

The guarantee period amounts to 36 months. For industrial use or equal wear, 

such as shift operations in particular, or in the event of rentals it amounts to 12 

months.
Systems driven by petrol or air are also guaranteed for a 12 month period. 
The guarantee period begins with the day of delivery by the authorised 

specialist shop. The date on the original purchase document is authoritative. 
For all products bought in authorised specialist shops from 01.02.2009 the 

Uncontrolled Copy

Summary of Contents for Vector Pro


















Reviews: