WAGNER TOPFINISH Bell 1S ECH, Translation Of The Original Operating Manual

Page: 4 / 76

4
VERSION 01/2021 ORDER NUMBER DOC2422004
TOPFINISH Bell 1S ECH
5.4 Data 24
5.4.1 Materials of Paint-wetted Parts 24
5.4.2 Technical Data 25
5.4.3 Dimensions 26
5.4.4 Air consumption 26
5.4.5 Connections on Valve Block - 1-Paint 27
5.4.6 Connections at Transition Piece 28
5.4.7 Connections on Control Cabinet RBC 1E (Single-Paint Valve Block) 28
6 COMMISSIONING 29
6.1 Training of Assembly/Commissioning Personnel 29
6.2 Storage Conditions 29
6.3 Installation Conditions 29
6.4 Transportation 29
6.5 Air Quality, Air Quantity and Air Pressure 29
6.6 Assembly and Installation 30
6.6.1 Typical Electrostatic Spraying System 30
6.7 Setting up Stationary Electrostatic Systems 31
6.7.1 Assembly of High-Speed Rotary Atomizer on Reciprocator 33
6.7.2 Ventilation of the Spray Booth 35
6.7.3 Air Supply Lines 35
6.7.4 Product Supply Lines 35
6.8 Grounding 36
6.9 Commissioning 37
6.9.1 Presettings 37
6.9.2 Safety Checks 38
6.9.3 Lacquer Preparations 38
6.9.4 Viscosity conversion table 38
6.9.5 Operating Instructions for Safe Operation 38
6.9.6 Calibration 40
6.9.7 Verifying a Safe Operational Condition 41
7 OPERATION 41
7.1 Training the Operating Personnel 41
7.2 Emergency Deactivation 41
7.3 Tasks 41
7.3.1 Adjusting the Spray Pattern 41
7.3.2 Pressure Relief/Work Interruption 42
7.4 For Internal Charging and Use of Solvent-Based Paints 42
7.5 Conversion from External to Internal Charging 42
7.6 Basic Flushing 43
7.6.1 Changing Bell Plate 44
7.6.2 Changing Complete Electrode Finger or Resistor Package 45
7.6.3 Changing Air Control Ring 46
7.6.4 Changing Carrier Ring 47
7.6.5 Changing Product Nozzle 48