37
PEM-X1
5
4
3
2
1
P_01672
OPERATING MANUAL
VERSION 09/2012
ORDER NUMBER DOC 2326020
8.2.4
REPLACING THE SPRAY GUN
Before replacing the spray gun any powder residue must be thoroughly removed.
The wear parts in the spray gun, marked in the spare parts list with " ", must be regularly
checked and, if necessary replaced.
Procedure:
1.
Switch off control unit.
2.
Disconnect electrical cable 1 from control unit 2.
3.
Disconnect the hoses for powder feed 3 and atomizing air 4 from the spray gun 5.
4.
Connect the hoses for powder feed 3 and atomizing air 4 to the new spray gun 5.
5.
Connect electrical cable 1 to control unit 2.
6.
Switch on control unit.
7.
The spray gun is ready for use again.
