HG-08 HVLP SPRAY GUN
INSTRUCTION MANUAL
INSTRUCTION MANUAL HG 2-27-2017
Description:
HG- Manual Spray Guns are for use
from Low to Medium Pressure with
Light to Medium. They will cover a
range of materials to include enamels,
latex, lacquers, acrylics etc. These
Models require 2 to 4 C.F.M. at 20-
40 lbs. Air Pressure depending on
thickness of Material being sprayed.
Tip and needle are made of Stainless
Steel and can handle water or solvent
based materials.
Specification:
Part Number: HG-08
Type: HVLP Gravity Feed
Head Size: .8mm (Optional sizes .5mm & 1mm)
Air Volume: 2-4 CFM
Air Pressure: 20-40 PSI
Air Inlet: ¼” NPT thread
Cup size: 3 oz (27SC) - (Optional 8oz (28SC)
Spray Pattern: 1” to 7”
Weight: .90 Lbs
Finish: Blue / Silver
Setup:
1. Blow out all airline hoses before connecting to the spray gun
to remove foreign particles.
2. Connect air hose to air inlet fitting.
3. Connect fluid cup or fluid hose to fluid inlet.
4. Tighten all hose connections securely.
5. Adjust air pressure to required amount at the regulator.
6. Adjust fluid volume by turning the fluid control knob.
7. The Fan pattern is controlled by turning the fan control Knob
8. Test spray on some cardboard or news paper for final
adjustment before spraying your project.
