17
VERSION 05/2019
ORDER NUMBER DOC2326960
PEM-X1 CG
4.2.7 MAINTENANCE AND REPAIR
Danger due to improper maintenance and repair!
Danger to life and equipment damage.
Only a WAGNER service center or a suitably trained person may carry out repairs and
replace parts.
Use only WAGNER original spare parts and accessories.
Do not change or modify the device; if change is necessary, contact WAGNER.
Only repair and replace parts that are listed in Chapter
and Chapter
that are
assigned to the device.
Do not use any defective components.
Before all work on the device and in the event of work interruptions:
– Switch off the energy and compressed air supply.
– Relieve pressure on powder spray gun and device.
– Secure the powder spray gun against actuation.
Observe the operating and service manual for all work.
4.2.8 PROTECTIVE AND MONITORING EQUIPMENT
Danger due to removal of protective and monitoring equipment!
Danger to life and equipment damage.
Protective and monitoring equipment must not be removed, modified or rendered
unusable.
Regularly check for perfect functioning.
If defects are detected on protective and monitoring equipment, the system must
not be operated until these defects are remedied.
To prevent electrostatic flashover, the union nut for securing the nozzles is designed in a
certain geometric shape.
This shape, together with the shape of the flat jet nozzle or deflector cone sleeve, prevents
the nozzles from coming loose unintentionally (see chapters
To ensure safety, only use genuine WAGNER spare parts!
