PEM-CG3
Introduction
Powder Cup Gun PEM-CG3
Article No. 0351035
X
45
0 m
m
D
H
F
G
J
B
C
E
A
K
L
X
green
red
A Electrode
B Deflector
cone
C Outer
nut
D Spray gun body
E Trigger
F Air supply (input air)
G Electrical
connection
H Powder container with fluidization
J Adapter with integrated powder injector
K Setting
knob
red
for setting the feed air
L Setting
knob
green
for setting the fluid air
The Corona manual spray gun
PEM-CG3
can be used for conventional types of powder and
metal powder that can be electrostatically charged is mainly suitable for laboratory tests,
sample coating and/or low volume production.
This cup gun can be operated with the following control units:
•
EPG 2007
control unit
Actuating the trigger activates the high voltage in the spray gun. At the same time, the powder
and compressed air supplies to the gun are turned on. The compressed air is required for
atomizing, feed, dosing and fluid air applications.
The cup gun is equipped with a powder container with a capacity of 500 cm
3
.
A 900 cm³ powder container can also be mounted on the cup gun.
You will find the article numbers in the spare parts list on page
.
Caution
The operator
must
ensure that the spray gun is only connected to
Wagner
devices!
To secure the spray guns, the control unit
must
be switched off.
0351713 2
03/2003
Summary of Contents for PEM-CG3
Page 23: ......
