WAGNER PEA-C4XL-S, Translation Of The Original Operating Manual

Page: 59 / 76

59
PEA-C4XL-S
OPERATING MANUAL
VERSION 03/2014 ORDER NUMBER DOC2345334
Fault Cause Remedy
No electrostatics (e.g. no wrap
around or powder adhesion) Fault in the high-voltage
generator Contact a Wagner service center
Electrical cable from spray gun
to control unit faulty Replace the electric cable
Cascade in spray gun faulty Contact a Wagner service center
Poor wrap-around
Back-spray Insuffi cient or no grounding See Chapter 6.7 "Grounding"
Powder outlet uneven or
inadequate Contamination Blow through parts carrying
powder
Powder sintering Clean parts carrying powder
Feed device contaminated See operating manuals for the
related devices connected
Feed air / dosing air ratio
incorrect Adjust at control module resp.
control unit
Wear on powder injector nozzle Replace worn parts on powder
injector ¹)
Spray pattern is uneven Parts of nozzle system worn Replace worn parts
1.) You will fi nd the wearing and spare parts in the powder injector operating manual.