WAGNER GM5000, Operating Manual

Page: 42 / 125

21
VM 500
OPERATING MANUAL
EDITION 03/2012 PART NUMBER DOC 2318724
The following points should be noted before commissioning:
➞
Lay earthing cable from the earthing screw on the device to the signal ground and
ensure that all other conductive parts within the area of work are earthed.
➞
Connect the VM 500 electrostatic control unit via the mains cable to the socket
interlocked with the extraction system.
➞
Connect the gun cable to the connector socket and screw into place.
➞
Connect the gun to the adjustable, clean air supply.
Compressed air quality class 3.5.2 according to ISO 8573.1.
➞
Connect the GM 5000EA or GM 5000EAC to the paint supply as described in the relevant
operating manual.
➞
Check that all material-conveying connections are correctly connected.
➞
Check that all air supply connections are connected properly.
➞
Visually check the permissible pressures for all the system components.
➞
Check the level of the separating agent in the pump and add more in necessary.
➞
Prepare a material container, a container for the cleaning agent and an empty container
for the return fl ow.
➞
The interface input on the back of the control unit has to be protected by the cover.
➞
Connect the system to the air supply.
➞
When starting the unit for the fi rst time -> clean the system in accordance with the
operating manuals for the other components.