18
03/2015
GB
CAUTION Risk of explosion!
When spraying flammable coating materials and when vapours from
coating materials and solvents are produced independently, flammable
gases can be produced in the area of work. When spraying there may be
no sources of ignition anywhere, e.g. naked flame, smoking cigarettes,
sparks, glowing wires, light switches, electrical devices, hot surfaces and
engines. The electrically operated spraying device contains potential
ignition sources itself. Set up the spray device at least 5 metres away
from the room in which the spraying is being executed. Longer hoses are
available as accessories as required.
5 m
•
The device may not be used in establishments that are subject to explosion
prevention regulations.
•
To avoid the hazard of explosion when spraying, provide for effective natural or
artificial ventilation.
•
Always switch off the car engine and allow it cool down completely before beginning
with the spray work.
•
Only connect the spray device to a socket-outlet that is outside of the room in which
the spray work is being executed.
•
Caution against dangers that can arise from the sprayed substance and observe the
text and information on the containers or the specifications given by the substance
manufacturer.
•
Do not spray any liquid of unknown hazard potential.
•
Ensure that no solvent vapors are sucked in by the unit. Do not spray onto the unit!
•
Always seal paint or solvent containers tightly in the vicinity of the device.
•
Do not leave the device out in the rain and do not operate in areas with high humidity
levels.
•
Use only containers made of plastic with the gun.
•
When spraying, no work may be carried out with electrostatics.
•
The spray device may not be modified or combined with parts that have not been
approved by the manufacturer.
•
Never operate the machine without the air filter.
•
Never pull on the hose to move the device.
•
The device is not a toy. For this reason do not allow children to handle or play with the
device.
