WAGNER EPG-Sprint X, Operating Manual

Page: 8 / 104

8
EPG-SPRINT X
OPERATING MANUAL
VERSION 06/2014 ORDER NUMBER DOC2329371
2
CORRECT USE
2.1
DEVICE TYPE
Universal control unit for controlling electrostatic manual and automatic spray guns
2.2
TYPE OF USE
The EPG-SPRINT X control unit is intended for controlling electrostatic manual and
automatic spray guns of type A-P (2 mJ) according to DIN EN 50177.
Incorrect use!
Risk of injury and damage to the device.
Only connect original Wagner spray guns to the EPG-SPRINT X
control unit.
The PEM-C3R and PEM-T3R manual spray guns cannot be
connected to the EPG-SPRINT X control unit.
WARNING
2.3
USE IN POTENTIALLY EXPLOSIVE AREAS
The EPG-SPRINT X control unit is intended for use with powder spray guns of types A-P up
to 2 mJ in accordance with the prototype test PTB 12 ATEX 5001.
The EPG-SPRINT X control unit may be used in the dust explosion zone (Zone 22) under the
following conditions:
Control unit correctly fi tted in rack.
Rack correctly and securely sealed on rear with associated cover.
All connections not needed (mains output, remote control) are sealed with dust
protection caps.