LOCKED
HANDLE
1
0
2
k
3
4
EN
7
BEFORE YOU BEGIN
i
This section contains instructions that will be repeated
throughout this manual. Read and understand this
section before using the equipment.
SPRAY GUN TRIGGER LOCK
Engage the trigger lock whenever instructed.
The gun is locked when the trigger lock is at a 90º angle (perpendicular to
the trigger in either direction).
MOVING / EMPTYING THE SPRAYER
When lifting the sprayer in order to move it or empty the tank, secure with
both hands the grooved handle area on both sides of the tank.
The sprayer can be heavy when filled with spraying
material. Make sure to lift with your legs and not your
back in order to reduce the risk of injury.
Do not use the tank lid to carry the sprayer as it may slip
off, causing the sprayer to be dropped.
Attention
Do not use the hose as a strength member to pull or lift
the equipment.
This pump is liquid-cooled. Do not allow the sprayer
to run without paint or water in the tank.
PRESSURE RELIEF PROCEDURE
Be sure to follow the Pressure Relief Procedure when
shutting the unit off for any purpose. This procedure
is used to relieve pressure from the spray hose.
1.
Turn the power OFF (0).
2.
Lock the spray gun. Turn the PRIME/SPRAY knob to PRIME.
3.
Unlock the spray gun. Briefly pull the trigger to fully relieve pressure
from the system.
4.
Lock the spray gun.
