manualshive.com logo in svg

WAGNER AquaCoat AirCoat GM 5000EACW, Operating Manual

Share
Download
WAGNER AquaCoat AirCoat GM 5000EACW Operating Manual Download Page 48

48

AquaCoat GM 5000EACW 

B_03534

1

2

3

4

5

6

7

8

9

10

Y

11

1

OPERATING MANUAL

EDITION 04/2012

PART NO. DOC2321362

5.4.6 

CHANGING FROM AIRCOAT ROUND JET TO AIRCOAT FLAT JET

1.  Flush the spray gun (1) out thoroughly with 

cleaning agent.

2.  Relieve the pressure of gun and unit.

3.  Save the spray gun (1) using the trigger lock.

4.  Unscrew round jet nozzle cap (2) incl. nozzle insert 

(3).

5.  Unscrew nozzle insert (3) using nozzle spanner (4).

6.  Unscrew nozzle nut (5) and remove nozzle screw 

connection (7) and sealing nipple (8) out off the 
nozzle body (6) and clean all parts thoroughly.

7.  Insert desired ACF5000 nozzle (11) into the valve 

housing.

8.  Put the air cap (10) on the nozzle (11) and pay 

attention to the position of the guide surfaces.

9.  Screw union nut with attached nozzle guard (9) to 

the gun body and make sure that the air cap horns 
lie in the designated recess (Y).

10.  Before tightening the air cap horns (Y) set the 

desired jet level and then tighten the union nut to 
the stop by hand.

Summary of Contents for AquaCoat AirCoat GM 5000EACW

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands