WAGNER AquaCoat AirCoat GM 5000EACW, Operating Manual

Page: 4 / 112

4
AquaCoat GM 5000EACW
OPERATING MANUAL
EDITION 04/2012 PART NO. DOC2321362
Contents
5.1.5 Safety checks 36
5.1.5.1 Earthing check 36
5.1.5.2 Inspection of the safety elements 36
5.2 Preparation of water-based paints 37
5.2.1 Viscosity conversion table 37
5.3 Starting operation 39
5.3.1 General rules for making adjustments to the spray gun 39
5.3.2 Preparation for starting up 40
5.3.2.1 Spray pack with pneumatic pump EvoMotion 20-30S 40
5.3.2.2 Spraypack examples with double diaphragm pump Cobra 40-10 42
5.4 Works 44
5.4.1 Preparation for spraying with fl at-jet nozzle 44
5.4.2 Start-up for spraying 45
5.4.3 Check spray pattern 46
5.4.4 Cleaning of clogged round jet nozzles 47
5.4.5 Exchange of round jet nozzle insert 47
5.4.6 Changing from AirCoat round jet to AirCoat fl at jet 48
5.4.7 Replacing AirCoat fl at jet nozzles 49
5.4.8 Cleaning of the nozzles 49
5.4.9 Eliminate nozzle clogging 49
5.4.10 Start-up the control unit VM 5000W 51
5.4.11 Set and save recipes 52
5.4.12 Setting the high voltage 53
5.4.13 Setting the current limiting 54
5.4.14 Spray display 55
5.4.15 Standby Mode 56
5.4.16 Operating hours counter/warning display 57
5.4.17 Maintenance display setup 58
5.4.18 “Conduct service” display 59
5.5 Device confi guration 60
5.5.1 Overview of parameters 60
5.5.2 Access to the device confi guration mode 61
5.5.3 Setting example “Parameter C13” 62
6 MAINTENANCE 64
6.1 Finishing work and cleaning 65
7 TROUBLE SHOOTING AND SOLUTION 66
7.1 Faults in the system 66
7.2 Error displays at the control unit VM 5000W 68
8 REPAIR WORK 70
8.1 Dismantling of the spray gun 71
8.2 Cleaning the parts after disassembly 74
8.3 Assembling the spray gun 75
8.4 Replacing the spray gun including hose set 79
8.5 Change material hose and/or air hose 80
8.6 Disassembling control unit VM 5000W 81
8.7 Opening the control unit 82