WAGNER AG-08 TS Owner'S Manual Download Page 16

16 

AG-08 TS

GB

Important notes on product liability

As a result of an EC regulation being effective as from January 1, 1990, the manufacturer shall 

only be liable for his product if all parts come from him or are released by him, and if the devices 

are properly mounted and operated.

If the user applies outside accessories and spare parts, the manufacturer´s liability can fully 

or partially be inapplicable; in extreme cases usage of the entire device can be prohibited by 

the competent authorities (employer´s liability insurance association and factory inspectorate 

division).

Only the usage of original WAGNER accessories and spare parts guarantees that all safety 

regulations are observed.

3+2 years guarantee for professional finishing 

Wagner professional guarantee 

(Status 01.02.2009)

1.   Scope of guarantee 

All Wagner professional colour application devices (hereafter referred to as products) are 

carefully inspected, tested and are subject to strict checks under Wagner quality assurance. 

Wagner exclusively issues extended guarantees to commercial or professional users (hereafter 

referred to as “customer”) who have purchased the product in an authorised specialist shop, and 

which relate to the products listed for that customer on the Internet under www.wagner-group.

com/profi-guarantee. 

The buyer’s claim for liability for defects from the purchase agreement with the seller as well as 

statutory rights are not impaired by this guarantee. 

We provide a guarantee in that we decide whether to replace or repair the product or individual 

parts, or take the device back and reimburse the purchase price. The costs for materials and 

working hours are our responsibility. Replaced products or parts become our property. 

2. Guarantee period and registration 

The guarantee period amounts to 36 months. For industrial use or equal wear, such as shift 

operations in particular, or in the event of rentals it amounts to 12 months.

Systems driven by petrol or air are also guaranteed for a 12 month period. 

The guarantee period begins with the day of delivery by the authorised specialist shop. The date 

on the original purchase document is authoritative. 

For all products bought in authorised specialist shops from 01.02.2009 the guarantee period is 

extended to 24 months providing the buyer of these devices registers in accordance with the 

following conditions within 4 weeks of the day of delivery by the authorised specialist shop. 

Registration can be completed on the Internet under www.wagner-group.com/profi-guarantee. 

The guarantee certificate is valid as confirmation, as is the original purchase document that 

carries the date of the purchase. Registration is only possible if the buyer is in agreement with 

having the data being stored that is entered during registration. 

When services are carried out under guarantee the guarantee period for the product is neither 

extended nor renewed. 

Once the guarantee period has expired, claims made against the guarantee or from the 

guarantee can no longer be enforced. 

3. Handling 

If defects can be seen in the materials, processing or performance of the device during the 

guarantee period, guarantee claims must be made immediately, or at the latest within a period 

of 2 weeks. 

The authorised specialist shop that delivered the device is entitled to accept guarantee claims. 

Guarantee claims may also be made to the service centres named in our operating instructions. 

The product has to be sent without charge or presented together with the original purchase 

document that includes details of the purchase date and the name of the product. In order to 

claim for an extension to the guarantee, the guarantee certificate must be included. 

The costs as well as the risk of loss or damage to the product in transit or by the centre that 

accepts the guarantee claims or who delivers the repaired product, are the responsibility of the 

customer. 

Summary of Contents for AG-08 TS





































































Reviews: