manualshive.com logo in svg

Wagner Meters Orion 910, Instruction Manual

Share
Download
Wagner Meters Orion 910 Instruction Manual Download Page 17

29

30

Dimensions with Boot

•  Length: 5.75 inches (146mm)
•  Width: 3.0 inches (76mm)
•  Thickness: 1.0 inches (25mm)

Scanning Area

•   2.0 inches (50mm) x 2.5 inches (63mm) 

Weight with Boot

•   7.2 oz. (204g)

Power

•  9-volt battery (Wagner recommends using 

non-rechargeable Alkaline or Lithium or 
rechargeable NiMH batteries)

Auto Power Shut-Down

•  60 seconds

Measurement Ranges

•  MC range for wood: 4.0% to 32.0%

Specific Gravity Range for Wood Species

•  0.20-1.0 SG

Storage Temperature and Humidity

•  +50˚F to +90˚F (+10˚C to +32˚C), Maximum 

relative humidity of 95%, non-condensing

Operating Temperature

•  +32˚F to +110˚F (+0˚C to +43˚C)

SPECIFICATIONS

Wagner’s IntelliSense

tm  

Technology

Your Orion® 910 moisture meter features 

Wagner’s IntelliSense

TM 

technology, going 

beyond the surface conditions for accurate 

measurements of moisture conditions 

inside the wood.

 

Most pinless meters are unable to 

distinguish between surface or ambient 

conditions on the surface of the wood, 

and the real moisture picture in the 

wood. Pin-type meters may be able 

to bypass the surface conditions, but 

they also damage the surface of the 

wood each time you take a reading. Air 

humidity, condensation, or other ambient 

conditions can impact many moisture 

meters and give inaccurate readings 

that cost you money. However, Wagner 

Meters’ hand-held moisture meters 

with IntelliSense

TM

 technology measure 

moisture IN the wood, not ON the wood, 

giving fast, highly accurate moisture 

measurement for woodworking or wood 

flooring  projects.  In  addition,  it  works 

without damage to the wood surface!

Summary of Contents for Orion 910






















Reviews:

No comments

Brands by name

Popular brands

Load more brands