Gebrauchsanweisung Untersuchungseinheit cubeONE,
directions for use, refraction unit cubeONE
18
Wagner & Guder Medical GmbH
issue September 2020
Electric connection
The electrical connection of the examination unit is made to a properly installed grounded contact
socket or the wall mounting box included in the delivery. Please use only the included power cable,
connection length 2,5m, cable cross-section 1mm
2
or the connection cable of the wall connection box.
Fuse box
2x T 6,3A / H
Mains switch
Power input
(2,5m, 1mm
2
)
In case of error
disconnect
HERE
!
Initial operation
- Plug the enclosed power cord into the power input socket provided
- Connect the power cord to a properly installed grounded outlet.
- Set the power switch to "I".
- Press the operating switch on the device table, the control lamp lights up green,
Page 19 (Position 8)
