Power Dome
®
NX by Wagan Tech
®
www.wagan.com
14
Power &
AM/FM
CH +
CH −
Audio Input
Memory
VOL +
VOL −
LCD screen
Turning On and Tuning the Radio
NOTE: Power Button (PWR) and AM/FM Button are the same button, but with two functions.
1. Carefully raise and extend the antenna.
2. Tap the PWR (power) button to turn the radio on. The current frequency is displayed in the
center and the “AM” or “FM” band is shown in the corner of the LCD screen.
3. Tap the AM/FM button quickly to switch between AM and FM bands.
4. Tap the “CH+” and “CH−” buttons to adjust the station. Press and hold the buttons to
automatically scan stations.
5. When finished, press and hold the PWR (power) button for at least 1 full second to turn off the
radio and return to clock mode.
6. Carefully retract the antenna and return it to the lowered position.
Adjusting the Volume
1. With the radio turned on, tap the “VOL+” or “VOL−” buttons to adjust the volume. Press and
hold the buttons to adjust the volume quickly. The radio can be adjusted up to 16 levels.
2. When using an external audio device in the Audio Input Jack, the volume will be controlled by
the external device.
Setting Radio Station Presets
The radio can hold up to 20 AM and 20 FM station presets in memory.
1. To record the current station as a preset, press and hold the MEMORY button for at least 1 full
second while the radio is playing on the desired station.
2. When the “M” flashes on the screen, tap the “CH+” or “CH−” button repeatedly to select the
desired memory position between 1–20.
