©2015 Wagan Corporation. All Rights Reserved.
Wagan Tech and
wagan.com
are trademarks used by Wagan Corporation.
User’s Manual—Read before using this equipment
15
3. Press and hold the MEMORY button once more to confirm the station preset at that position.
The radio will switch back to regular radio mode.
4. Repeat steps 1 to 3 for each desired preset station.
5. After preset station are recorded, to select a preset station, tap the MEMORY button. The
preset station will display on the LCD screen with “M” and the preset number 1–20.
3�5MM AUDIO INPUT
1. Turn the radio on.
2. Insert a user-supplied 3.5mm audio cable into the audio input jack.
3. Insert the opposite end of the cable into a compatible audio device.
4. Turn on the audio device and set it to output sound. The sound should be audible from the
Power Dome speakers.
Note: The Power Dome’s USB Power Port can conveniently charge your audio or mobile device
while music is playing.
SETTING THE CLOCK
1. With the radio off and the display showing in clock mode, tap the MEMORY button.
2. The LCD screen will flash and enter clock set mode.
3. Tap the “CH+” button to increase the hour. Hold the button continuously to increase the
adjustment speed. The display will switch from AM to PM and PM to AM appropriately.
4. Tap the “CH−” button to increase the minutes. Hold the button continuously to increase the
adjustment speed.
5. When your local or desired time is set, tap the MEMORY button again to confirm the new
clock time and the LCD screen will return to regular cock mode.
