DigiSet Tire Inflator
™
by Wagan Tech
®
3
www.wagan.com
OPERATION
s
WARNING: DO NOT OVERINFLATE PRODUCTS BEYOND THE
MANUFACTURER’S RECOMMENDATIONS.
s
WARNING: NEVER LEAVE COMPRESSOR UNATTENDED WHILE IN USE.
s
WARNING: ALLOW THE UNIT TO COOL FOR 15 MINUTES AFTER EACH 10
MINUTES OF USE.
s
WARNING: NEVER STAND DIRECTLY IN-FRONT OF TIRE WHEN FILLING.
1. To achieve optimal performance, your vehicle’s engine should be running
when operating your tire inflator.
2. Unwind the power cord and insert the DC plug into the 12V socket of your
vehicle.
3. Remove the air hose from the back of the device and connect it to the valve
stem of the tire.
• Once connected, the tire inflator will display the tire’s current air
pressure measurement.
4. Press the R button to toggle between PSI, Bar, and KPA.
5. Press the "+" or "−" buttons to set the desired air pressure.
6. Once the pressure is set, press the On button.
7. The inflator will automatically turn off once the desired pressure is reached.
• To turn off the inflator before the set pressure is reached, press the
On/Off button.
• Do not run for more than 10 minutes. Allow inflator to cool for 15
minutes before using again.
8. Remove air hose from tire when finished.
