www.wagan.com
11
Elite
™
400W Pure Sine Inverter by Wagan Tech
®
Specifications
*
• Output Waveform: True Sine Waveform
• Input: 10–15V DC
• Output: 120V AC
• TrueRated
™
Power: 400 watts
• Peak Surge: 800 watts
• Efficiency: > 90%
• Frequency: 60Hz
• Total Harmonic Distortion (THD): < 3%
• No load current draw: < 0.5A
• Battery low alarm: 10.5V ± 0.3V DC
• Battery low shutdown: 9.5V ± 0.3V DC
• Over voltage shutdown: 15.5V ± 0.5V DC
• Cooling fan is thermally controlled
• AC output sockets: 1 US standard
• USB Power Port: 500 mA, 5V ± 0.25V
• Power switch AC Output ON/OFF control
• Dimensions: 7.8 in × 3.6 in × 1.9 in (19.7 cm × 9.1 cm × 4.8 cm)
• Net Weight (approximate): 1.6 lb (0.73 kg)
*All specifications are typical at nominal line, half load, and 77ºF (25ºC) unless
otherwise noted. Specifications are subject to change without notice.
The WAGAN Corp. warranty is limited to products sold only in the United States.
All Wagan Tech products must be registered within (30) days of purchase to activate
its warranty. To register your product, please visit
http://tinyurl.com/waganwarranty
.
Be sure to keep the original receipt as it will be required when returning a product
under the warranty.
Warranty Duration: This product is warranted to the original purchaser for a period
of two (2) years from the original purchase date, to be free of defects in material
and workmanship. WAGAN Corporation disclaims any liability for consequential
damages. In no event will WAGAN Corporation be responsible for any amount of
damages beyond the amount paid for the product at retail.
Warranty Performance: During the above two (2) year warranty period, a product
with a defect will be replaced with a comparable model when the product is returned
to WAGAN Corporation with an original store receipt. The replacement product will
be in warranty for the balance of the original two (2) year warranty period.
To return a defective item, please contact WAGAN Corporation at (800) 231-
5806 to obtain a Returned Merchandise Authorization number (RMA#), and return
instructions. Each item returned will require a separate RMA#. After you have
received the RMA# and the return instructions from WAGAN Corporation, please
follow the instructions and send the item with PREPAID SHIPPING, along with all of
the required documentation, a complete explanation of the problem, your name,
address and daytime phone number. WAGAN Corporation will, at its option,
replace or repair the defective part.
A Returned Merchandise Authorization number (RMA#) is REQUIRED when sending
in any defective item. WAGAN Corporation is not responsible for any item(s)
returned without an official Returned Merchandise Authorization number. The item(s)
must be returned with prepaid shipping. WAGAN Corporation is not responsible
for any shipping charges incurred in returning the item(s) back to the company
for repair or replacement. This warranty is void if the product has been damaged
by accident, in shipment, unreasonable use, misuse, neglect, improper service,
commercial use, repairs by unauthorized personnel or other causes not arising out
of defects in materials or workmanship. This warranty does not extend to any units
which have been used in violation of written instructions furnished.
Warranty Disclaimers: This warranty is in lieu of all warranties expressed or
implied and no representative or person is authorized to assume any other liability
in connection with the sale of our products. There shall be no claims for defects
or failure of performance or product failure under any theory of tort, contract or
commercial law including, but not limited to negligence, gross negligence, strict
liability, breach of warranty and breach of contract.
©2008 WAGAN Corp. REV2012
WAGAN Corp. Limited Warranty
