Slim Line 3000 Watt Power Inverter by Wagan Tech
USER’S MANUAL — Please read before using this equipment.
________________________________________________________________________________________________________________________________________________________________
www.wagan.com
© 2003 Wagan Corporation.
All Rights Reserved.
Wagan and Wagan.com are trademarks used by Wagan Corporation.
Printed in China
6
8. Set power inverter switch to the ON position and turn the test
load on, the inverter should supply power to the load. If you plan
to measure the true output R.M.S. voltage of inverter, a meter
such as FLUKE 87A, BACKMAN 4410 or TRIPLETT 4200 must
be used.
CAUTION:
•
DO NOT USE THE INVERTER IN A POSITIVELY GROUNDED
VEHICLE.
RECOMMENDATION
•
If the power inverter makes a beeping sound, turn OFF the
power inverter and disconnect all appliances from inverter and
disconnect the inverter from power supply. The beeping sound
is simply the low battery warning, which indicates that the
voltage of the battery power supply is getting low. Please restart
the vehicle engine before operating the power inverter.
•
When you are not using the inverter, turn the power switch to
OFF and disconnect the inverter from power supply.
•
Disconnect the inverter when starting the vehicle’s engine.
CAUTION:
THE FOLLOWINGS OPERATION WILL DAMAGE AND VOID THE
WARRANTY OF THE INVERTER:
•
REVERSE POLARITY BY CONNECTING THE WIRES TO THE
INCORRECT TERMINALS.
•
CONNECTING THE BATTERY CHARGER TO REPLENISH
BATTERY WITHOUT DISCONNECTING THE INVERTER
FIRST.
•
CONNECTING THE INVERTER TO POWER SOURCE GREATER
THAN 15-VOLT DC.
•
OPERATING THE INVERTER AND BATTERY IN OR AROUND
WATER.
MEASURING THE AC VOLTAGE
The output waveform of the AC inverter is a MODIFIED SINEWAVE. To
measure the AC output voltage, you must use a TRUE RMS VOLTMETER.
