User’s Manual—Please read before using this equipment
©2009 Wagan Corporation. All Rights Reserved.
Wagan and wagan.com are trademarks used by Wagan Corporation.
When the desired pressure is reached, turn off compressor and turn the
locking thumb lever to the UP position. Remove the stem connector from
valve stem. Also remove the valve stem adapter if applicable.
Replace the cap on the air valve stem.
Inflating plastic inflatables (balls, air mattresses, rubber rafts, etc.)
Check manufacturer’s specifications on items to be inflated for correct inflation
pressure.
Remove the cap from the air valve stem.
Insert the proper valve stem adapter into stem connector as far as
possible and turn the locking thumb lever to the DOWN position.
Insert the other end of the valve stem adapter into the inflatable air valve
stem as far as practical.
Set the unit’s On/Off safety switch to the “ON” position.
Set the compressor On/Off switch to the “ON” position.
Monitor pressure on the air pressure gauge.
When the desired pressure is reached, turn off compressor and turn the
locking thumb lever to the UP position. Remove the stem connector from
the valve stem. Also remove the valve stem adapter if applicable.
Replace the cap on the air valve stem.
Dc POWeR PORT
The DC power ports (accessory sockets) are located to the left and right side
of the front of the unit. The ports can power a DC load of up to Amps.
Overloading the ports may result in “tripping” a self-resetting circuit breaker.
Removing the overload automatically restores power to the DC Power Ports.
.
8.
.
2.
.
4.
5.
.
.
8.
