R
500 Peak amp Jumpstarter with air compressor by Wagan Tech
4
©2009 Wagan Corporation. All Rights Reserved.
Wagan and wagan.com are trademarks used by Wagan Corporation.
Do not operate this device while wearing vinyl clothing. Static electricity
may be generated when vinyl clothing is rubbed.
This product is not intended for use in the rain or temperatures above
0°F.
Use only the provided chargers, cables and clamps. Unauthorized parts
may damage the unit.
The product must be properly assembled in accordance with the
assembly instructions before it is used.
This product has no consumer serviceable parts.
This product is not a toy. Keep out of the reach of children.
Keep battery terminals clean. Be careful to keep corrosion from coming
in contact with eyes.
Do not let the wires of the jumpstarter or attached appliances get wet.
Do not operate this unit in or around water. Water can damage the unit.
cHaRGiNG aND RecHaRGiNG:
WARNING: Do not overcharge this unit. Overcharging may result in
damage. Prior to charging, read and understand all instructions.
This product may arrive partially charged from the manufacturer. It is
recommended to fully charge the unit immediately after purchase and
before using for the first time.
The red charging LED indicator will be illuminated while charging. After
charging period is completed, push the red “Battery Indicator Button”
and the battery voltmeter should register between 2–4V. The battery is
now fully charged.
Do not charge the unit for more than 48 hours continuously.
•
•
•
•
•
•
•
•
•
•
•
•
•
