manualshive.com logo in svg

Wagan 2007-2, User Manual, Page: 2 / 22

Share
Download
Wagan 2007-2 User Manual Download Page 2

3000 Watt AC Inverter by Wagan Tech

2

Thank you for purchasing this 3000 Watt DC to AC Power Inverter by Wagan Tech. With 

minimal care and proper treatment it will provide years of reliable service. Carefully 

read, understand and comply with all instructions before use. Keep this manual for future 

reference.

About This Inverter. 

This power inverter converts 12 volts, direct current (12VDC) to 115 volts alternating 

household current (115VAC). It easily powers TV/VCR combinations, microwave ovens, 

refrigerators, and small air conditioners. It also operates at highest efficiency (up to 90%) 

that results in longer running time and extended battery life compared to other inverters with 

this level of power output.

This inverter has the highest surge capability in its class. Superior surge capability allows 

the inverter to start the most difficult motorized loads. Advanced microprocessor-controlled 

circuits run cooler and are more reliable than competing units. 

General Instructions: 

Keep the inverter away from any direct heat source or combustible materials. 
Keep well ventilated – this device generates heat.
Keep the inverter away from combustible gases.
Do not continuously operate any equipment over 3,000 watts. 
This inverter is designed to operate from a 12 volt DC power source only. 
Do not attempt to connect the inverter to any other power source, including any AC 

power source.
Incorrect battery polarity will damage the inverter and void the warranty.
Keep this inverter in a dry environment.
Do not open the inverter; there are no user serviceable parts inside.

•
•
•
•
•
•

•
•
•

R

www.wagan.com

Summary of Contents for 2007-2























Reviews:

No comments