If you hear 3 beeps 5 times and the red light
flashes 3 times, it means the battery power is
low. Please change the battery immediately.
1
2
Low Battery Warning (Battery Replacement)
1. There is only one combination to unlock the cylinder.
If new code is programmed successfully, the existing
one will be replaced.
2. The default combination is 123456. This code will be
able to unlock the cylinder before it is programmed.
Touch the
WAFERLOCK
logo for 1 second
until the Green light flashes 2 times.
Rotate the knob with the number to the twelve
o’clock position, the number will blink. Once the
light is steady, it means the number is chosen.
After 4-6 digits are correctly chosen,
rotate the knob with # to the twelve o’clock
position until the numbers flash in order 2 times.
Unlock With The Combination
1. If incorrect codes are entered for 5 times, the
combination feature will be disabled for 3 minutes with
2 short beeps and the red light flashes 2 times.
2. If enter the invalid code 1 time after 3 minutes, the
combination feature will be disabled for 3 minutes
again.
3. Only authorized access can lift the prohibition or until
3 minutes pass.
Note
3
2
1
Green X 2
1
se
c
Rotate the knob with the number to the twelve
o’clock position, the number will blink. Once the
light is steady, it means the number is chosen.
Tap the programming card on the cylinder 1 time.
Your Warranty
Your Warranty covers all manufacturers' defects in workmanship
and material.It does not cover any unit that is damaged beyond
normal usage, by improper installations, by contacts to chemicals,
or any other acts or omissions unsanctioned within the user
manual. All components are covered for one (1) year after the
date of purchase or installation from supplier.
The user is required to provide dated proof of purchase.
Waferlock or its authorized distributor will determine if there is a
warrantable condition associated with material and/or
manufacturing workmanship.
If the lock conforms to the warranty conditions, the lock will be
repaired free of charge. The shipping freights would be at owner's
expense.
The warranty does not include any further obligation whatsoever,
including but not limited to the installation of the replacement
unit to the customer's lock.
All other warranties, express or implied, are disclaimed. All
collateral agreements, which purport to modify this limited
warranty, are of no effect.
Fully insert the hexagon key in the screw
head and simultaneously turn the screws
clockwise to remove the outer cylinder knob.
WAFERLOCK CORPORATION
Tel: 886-4-24620208 Fax: 886-4-24636286
No. 16 Ke Yuan 2nd Rd., Central Taiwan Science Park
Taichung city 407, Taiwan.
E-mail: [email protected]
1
2
Initially, tap the programming card on the
reader, then there will be 2 beeps and green
light starts flashing. Re-do the same procedure
for second time, there will be 2 beeps and
green light keep flashing.
For the third time, follow the former same
steps, and keep tapping card for around
5 seconds until a long beep occurs. The red
light will flash 5 times, and all user cards have
been deleted.
1
Progr
amming
Red X 5
3 times
To delete all users
Standalone Mode Programming Instruction
