Waeco SinePower MSI1312, Installation And Operating Manual

Page: 55 / 436

EN
SinePower Cleaning and caring for the inverter
55
Switching to energy-saving mode
You can set the energy-saving mode using the S4, S5 and S6 dip switches.
In this way, the battery you connect to the inverter is not discharged as quick-
ly.
The inverter operates in energy-saving mode as long as the required power
is below the set level. If the required power exceeds the set level, the inverter
works in normal mode.
The values to be set on your inverter can be found in the following table:
Defining settings
Using the S8 dip switch you can define whether the default settings or the
settings of dip switches S1-S7 are used.
11 Cleaning and caring for the inverter
A
➤ Occasionally clean the product with a damp cloth.
Energy-saving mode Dip switch
MSI900 MSI1300 MSI1800 S4 S5 S6
Off Off Off Off Off Off
– <60 W <110 W On Off Off
<70 W <130 W <180 W On On Off
<200 W <210 W <220 W On On On
Dip switch
Parameter S8
Default settings Off
Use dip switch S1-S7 On
NOTICE!
Do not use sharp or hard objects or cleaning agents for cleaning
as these may damage the product.