Waeco SinePower MSI1312, Installation And Operating Manual

Page: 46 / 436

EN
Connecting the inverter SinePower
46
8.3 Mounting the inverter
➤ Hold the inverter against the installation location and mark the fastening
points (fig.
4 A, page 4).
➤
Attach the inverter using your chosen fastening method (fig. 4 B,
page 4).
9 Connecting the inverter
9.1 General instructions
!
 When installed in vehicles or boats, the inverter must be connected to the
chassis or earth.
 When setting up a socket distribution circuit (mains setup), comply with
the applicable regulations.
 Only use copper cables.
 Keep the cables as short as possible (< 1.8 m).
WARNING!
 The inverter may only be connected by a qualified workshop.
The following information is intended for technicians who are
familiar with the guidelines and safety precautions to be ap-
plied.
 Never use the inverter on vehicles where the positive terminal
of the battery is connected to the chassis.
 If you do not fit a fuse to the positive cable , the cables can
overload, which might result in a fire.

Reversed polarity can damage the inverter.
 MSI900, MSI1300, MSI1800 only : The inverter should not be
used to connect to a ring main, it must only be used to power
individual appliances that are plugged into the inverter outlet
either directly or using a purpose-made, moulded extension
lead