Waeco Piccolo FM-05-JURA01, Instruction Manual

Page: 18 / 72

EN
Operation Piccolo
18
6.2 Using the cooling device
a
Caution!
When using the refrigerator as a milk cooler, also see the instruc-
tions in the customer documentation of your coffee maker.
a
Caution!
Like every refrigerator, your cooler must be properly ventilated so
that any heat created can dissipate. Otherwise, it may not work
properly.
I
Note
Seal the openings on the sides of the appliance with the cover
plugs supplied if you have not fed a tube inside.
➤
Place the refrigerator on a firm base.
Ensure that the ventilation slots are at least 10 cm away from the wall so
that the heat that arises during operation can be drawn off.
➤
Insert the flat plug of the 230 V cable (fig. 1 2, page 3) into the socket
(fig. 2 1, page 3) on the appliance and insert the power plug into the
230 V socket.
I
Note
For use as a milk cooler for coffee makers only, the refrigerator has
holes in both sides:
– left: one hole
– right: two holes
Remove a plug and push the milk tube into the appliance. Now the
coffee maker can draw up cold milk directly from a suitable vessel
inside the refrigerator.
➤
Push the switch (fig. 2 2, page 3) on the control panel to “HOT” or
“COLD” to switch the device on.
✓
The refrigerator starts cooling/heating the interior and the appropriate
LED lights up.
a
Caution!
Ensure that the objects placed in the refrigerator are suitable for
cooling or heating to the selected temperature.
➤
When you stop using the refrigerator, set the switch (fig. 2 2, page 3) to
“OFF”.