PerfectView M7LS
Safety and installation instructions
EN
27
If you disconnect the negative terminal of the battery, all data stored in the volatile
memories will be lost.
z
The following data must be set again, depending on the vehicle equipment options:
– Radio code
– Vehicle clock
– Timer
– On-board computer
– Seat position
You can find instructions for making these settings in the appropriate operating
instructions.
Observe the following installation instructions:
z
Secure the monitor in such a way that it cannot become loose under any circumstances
(sudden braking, accidents) and cause
injuries to the occupants
of the vehicle.
z
Do not attach the monitor in the air bag deployment path, as this could cause injury if
the airbags are triggered.
z
To prevent damage, when drilling ensure that there is sufficient space on the other side
for the drill head to come out (fig.
2
, page 4).
z
Deburr all drill holes and treat them with a rust-protection agent.
Observe the following instructions when working with electrical parts:
z
When testing the voltage in electrical cables, only use a diode test lamp
(fig.
1
1, page 3) or a voltmeter (fig.
1
2, page 3).
Test lamps with an illuminant (fig.
1
3, page 3) consume voltages which are too high
and which can damage the vehicle’s electronic system.
z
When making electrical connections (fig.
3
, page 4), ensure that
– They are not kinked or twisted
– They do not rub on edges
– They are not laid in sharp edged ducts without protection
z
Insulate all connections.
z
Secure the cables against mechanical wear with cable binders or insulating tape,
for example to existing cables.
Observe the following instructions when handling the LCD monitor:
z
Do not open the monitor (fig.
4
, page 4).
z
Do not submerge the monitor in water (fig.
5
, page 4); the monitor is not waterproof.
z
The monitor must not impair your vision when driving (fig.
b
, page 7).
z
Only use the monitor as an aid for reversing, while the vehicle is in motion. It may not
be used for any other purpose, for example, as a monitor for a DVD player.
z
Do not operate the monitor with wet hands.
z
Do not operate the monitor if the housing has been damaged.
_M7LS.book Seite 27 Freitag, 14. Oktober 2011 5:32 17
Summary of Contents for PerfectView M7LS
Page 4: ...PerfectView M7LS 4 2 3 4 5 _M7LS book Seite 4 Freitag 14 Oktober 2011 5 32 17...
Page 6: ...PerfectView M7LS 6 A B 9 0 a _M7LS book Seite 6 Freitag 14 Oktober 2011 5 32 17...
Page 7: ...PerfectView M7LS 7 b _M7LS book Seite 7 Freitag 14 Oktober 2011 5 32 17...
Page 9: ...PerfectView M7LS 9 1 3 2 4 e _M7LS book Seite 9 Freitag 14 Oktober 2011 5 32 17...
