Using the compact charger
PerfectBattery BC400
28
6.4
Charging a battery
➤
Select the charging current by setting the charging switch (fig.
1
1,
page 3) to the required value.
➤
Connect the mains cable (fig.
2
1, page 3) to a 230 V socket.
✓
The battery charging process starts now.
✓
The “Charging” LED (fig.
1
9, page 3) glows.
Note
During the charging process you can
– Interrupt the charging process at any time or
– Change the charging current by setting the charging switch
(fig.
1
1, page 3) to the desired value.
When the battery is fully charged:
✓
The “Charging” LED (fig.
1
9, page 3) goes out.
✓
The “Full” LED (fig.
1
8, page 3) glows.
6.5
Shutting down the compact charger
➤
After use, first disconnect the connection to the AC mains.
➤
Disconnect the black cable from the negative terminal of the battery.
➤
Disconnect the red cable from the positive terminal of the battery.
MBCC-400.book Seite 28 Montag, 18. Februar 2008 4:00 16
