PerfectBattery BC400
Using the compact charger
27
– Connect the red terminal of the compact charger to the positive termi-
nal of the battery.
– Connect the black terminal of the compact charger to the chassis, e.g.
the engine block.
➤
If the
positive terminal is connected to the chassis
, connect the termi-
nals as follows:
– Connect the black terminal of the compact charger to the negative ter-
minal of the battery.
– Connect the red terminal of the compact charger to the chassis, e.g.
the engine block.
➤
Connect the cable to the terminals (fig.
1
5, page 3) using the adapter
plug (fig.
1
3, page 3) of the compact charger.
➤
Charge the battery as described in the "Charging a battery" chapter on
page 28.
Connecting batteries that are not installed in vehicles
➤
Connect the red terminal (fig.
2
3, page 3) of the compact charger to the
positive terminal of the battery (fig.
2
4, page 3).
The positive terminal can usually be distinguished from the negative ter-
minal by the larger diameter of its connection. In addition, red cables are
used for the connection to positive terminals in most vehicles.
➤
Connect the black terminal (fig.
2
2, page 3) of the compact charger to
the negative terminal of the battery (fig.
2
4, page 3).
Note
If the red “Reverse Connection” LED (fig.
1
7, page 3) glows you
have reversed the polarity.
Disconnect the battery from the compact charger immediately and
connect the cables with the correct polarity.
➤
Connect the cable to the terminals (fig.
1
5, page 3) using the adapter
plug (fig.
1
3, page 3) of the compact charger.
➤
Charge the battery as described in the "Charging a battery" chapter on
page 28.
MBCC-400.book Seite 27 Montag, 18. Februar 2008 4:00 16
