magic watch
Installing MAGIC WATCH
43
➤
Insert the socket of the piezoelectronic speaker into the socket of the
extension cable (see
e
A, page 7).
➤
Insert the four-pole cube plug of the connection cable (
f
6, page 7)
into the socket of the control device.
Make sure the locking pin catches.
➤
Insert the six-pole plug of the connection cable (
f
6, page 7) into the
socket of the connection box.
Make sure the locking pin catches.
➤
If you also wish to use the camera and monitor
when driving forwards
,
connect the red cable (
f
7, page 7) of the connection box to a positive
connection (e.g. ignition, terminal 15).
➤
If you also wish to use the camera and monitor
only when reversing
,
connect the red cable (
f
7, page 7) of the connection box to the positive
connection (+) of the reversing light.
➤
Connect the black cable (
f
8, page 7) of the connection box to the to the
earth wire (–) of the reversing light or to earth (bodywork).
To connect the monitor, (
f
9, page 7) you require an additional
cinch cable which is not included in the scope of delivery.
➤
Connect the monitor cable supplied (
4
8, page 4) to the monitor.
➤
Connect the monitor cable (
4
8, page 4) with the cinch cable.
➤
Insert the plug of the monitor cinch cable in the “To Monitor” socket
(
f
9, page 7).
➤
Connect the cinch cable to the camera.
➤
Insert the plug of the camera cinch cable in the “To Camera” socket
(
f
10, page 7).
MWE-850-XXL-4.book Seite 43 Freitag, 8. Juli 2005 10:29 10
