Waeco CR-50, Operating Manual

Page: 46 / 344

EN
Using the refrigerator CoolMatic
46
➤ Protect the AC circuit using a slow-blow fuse (250 V/4 A).
➤
Connect the power cable to the AC power supply.
➤
Plug in the connecting cable to the AC socket (fig. g 1,page 10).
Proceed as follows when you connect the refrigerator to a DC supply when
a rectifier is fitted:
➤
Connect the loose DC cable (fig. g 2, page 10) to the battery:
– Red cable: positive battery terminal
– Black cable: negative battery terminal
8 Using the refrigerator
I
8.1 Energy saving tips

Choose a well ventilated installation location which is protected from
direct sunlight.
 Allow hot food to cool down first before you put it in the refrigerator.
 Do not open the refrigerator more often than necessary.
 Do not leave the door open for longer than necessary.
 Defrost your refrigerator as soon as a layer of ice forms.
 Avoid unnecessarily low temperature settings.
 Clean dust and dirt from the condenser at regular intervals.
NOTE
Before starting your new refrigerator for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter “Cleaning and care” on page 50).